3L Insulated Hardshell Jacket （2026）

$149.00

颜色Glacier Blue

尺寸 S M L XL

目标性别Unisex

Built for cold backcountry & alpine ski adventures. This 3L insulated hardshell jacket from our Polar Series delivers reliable waterproof and windproof protection with zone-specific 3M insulation for consistent warmth in frigid mountain conditions.

Tech

80g 3M Insulation

Premium 80GSM 3M insulation delivers stable, lightweight warmth. It retains heat efficiently without adding excessive weight, optimized for cold alpine skiing conditions.

Zone-Specific Thermal Insulation

Precision-engineered insulation layout uses 80GSM 3M insulation targeted at the back and torso sides, reinforcing warmth around your core heat zones. This tailored placement prevents cotton bulk build-up, preserves mobility and avoids trapped overheating during active skiing.

Waffle Fleece Lining

Crafted from premium, higher-cost raw materials, this waffle fleece lining delivers exceptional next-to-skin softness and traps body heat evenly, providing consistent, comfortable warmth throughout cold mountain days.

RECCO® Rescue Reflector

An integrated RECCO® reflector enables professional search-and-rescue teams to pinpoint your location using directional radar in backcountry or avalanche emergencies. Requires no batteries or setup, providing seamless, zero-maintenance peace of mind on the mountain.

Details

Zipper-Integrated Emergency Whistle

Emergency whistle integrated onto front zipper for quick access in mountain emergencies.

Non-Removable Integrated Snow Skirt

Fixed built-in snow skirt blocks snow from entering the jacket during skiing.

Dual-Adjustment Helmet-Compatible Hood

Helmet-friendly hood with hood circumference and brim size adjustment for a secure fit.

Left Chest Quick Pocket with Gear Tether

Quick-access left chest pocket with anti-loss tether, swappable for goggles or your phone.

Large Abdominal Pockets

Two spacious abdominal pockets for easy storage of essentials on the slope.

Inner Left Chest Pocket

Secure internal chest pocket on the left side for small valuables.

Arm Ski Card Pass Pocket

Sleeve pocket designed to hold your ski pass for contactless scanning.

Adjustable Drawcord Hem

Adjustable hem drawcord seals out cold wind to retain body heat inside the jacket.

Windproof Cuffs

Windproof cuffs create a tight seal at wrists to block cold air and lock in warmth.

Under-Arm Pit Zips

Under-arm ventilation zips to release excess heat during high-output activities.

The insulated 3L hardshell ski jacket from our Polar Series. Engineered for alpine and backcountry freeriding in freezing conditions, this jacket pairs our proven 3L hardshell construction with body-mapped 3M™ Thinsulate™ Insulation to deliver maximum warmth without adding unnecessary bulk or restricting mobility.

Designed for severe sub-zero mountain environments. We strategically targeted insulation across the core torso and back to lock in body heat while keeping high-output movement zones flexible—ideal for long summit ascents and cold backcountry tours.

Fabric Performance (CNAS‑ILAC‑MRA Accredited Lab):

Hydrostatic Resistance: >34,000 mmH₂O (JIS L1092:2009 Method B)
Water Vapor Permeability: 14,300 g/m²/24h (Inverted cup method)
Martindale Abrasion: >30,000 cycles
Surface Water Repellency: Grade 4–5 (ISO 4920 spray test, initial finish)

Note on Performance: All figures represent brand-new, unwashed fabric ratings. DWR finish naturally degrades with wear and washing. Please note: While the outer 3L fabric achieves high breathability, built-in thermal insulation naturally lowers net moisture expulsion. This jacket is engineered primarily for cold-weather thermal protection.

Technical Core Properties
Waterproof | Windproof | Body-Mapped Insulation | Abrasion Resistant

Shell & Material Construction

Face Fabric: 70D–160D high-tenacity nylon with DWR water-repellent finish; COSTA yarn construction
Membrane: High-performance fluorine-free PU membrane
Insulation & Lining: Body-mapped 3M™ Thinsulate™ Insulation paired with high-loft waffle fleece lining

Fit & Mobility

Regular Alpine Fit: Ergonomically patterned to accommodate thermal base layers without restricting range of motion

Alpine Safety & Functional Details

RECCO® Reflector: Integrated avalanche rescue technology for backcountry emergency location
Emergency Whistle: Zipper-integrated safety whistle for quick access in extreme weather
Powder Protection: Fixed integrated snow skirt seals out deep snow and wind drafts
Helmet-Compatible Hood: Precision 3-point hood adjustment system (circumference + brim adjustment)
Weather-Sealed Closure: RBR® water-resistant zippers with reinforced 3-layer seam taping across critical areas
Adjustable Hem & Cuffs: Bottom hem drawcord tightening system; glove-friendly Velcro cuffs with windproof internal storm tabs

Storage & Pocket Configuration

1 Quick-Access External Chest Pocket: Fitted with detachable anti-loss elastic tether for goggles or phone
2 Large-Volume Handwarmer Pockets: Fleece-lined waist-level pockets for rapid warmth and gear storage
1 Internal Zippered Chest Pocket: Secure storage for personal electronics
1 Lower Arm Pass Pocket: Dedicated RFID ski pass pocket for fast lift gate scanning

Streamlined 2-Layer Alpine System

Engineered as a high-performance all-in-one weather barrier. By integrating 3M™ Thinsulate™ thermal insulation directly into a 3-layer stormproof hardshell, our Polar Series jacket eliminates the need for bulky mid-layers. Simply pair it with a technical base layer for optimal warmth, breathability, and maximum mobility on the mountain.

Layer 1 – Technical Base Layer (Next-to-Skin)
A high-output moisture-wicking top. Pulls sweat away from skin to eliminate cold dampness and post-activity chill, maintaining a dry internal microclimate all day on snow.

Layer 2 – Our Polar Series 3L Insulated Hardshell
Your all-in-one weather barrier and thermal core. The 3-layer outer shell seals out snow, rain, and mountain wind, while body-mapped 3M™ Thinsulate™ insulation delivers targeted warmth in severe low-temperature environments.

Materials

Shell: 3L high-performance construction with 70D–160D recycled plain weave nylon; fluorine-free (FC0) DWR finish; premium waterproof breathable PU membrane; 100% nylon backing
Insulation: 3M™ Thinsulate™ Insulation (body-mapped placement at back and torso sides for core warmth)
Lining: High-loft waffle fleece
Traceability: Fabric Origin: China | Dyeing Origin: China | Country of Manufacture: China
Environmental Note: May release plastic microfibres into the environment during washing.

Care

Machine wash cold (30°C / Gentle cycle)
Tumble dry low to medium heat (helps reactivate DWR finish)
Do not bleach
Do not dry clean
Do not iron
Wash separately
Do not use fabric softeners or liquid detergents with softeners
Close all zippers and hook-and-loop fastenings before washing
Double rinse to ensure complete detergent removal
Do not leave wet / Remove immediately after wash cycle

Standard Shipping
All orders are dispatched within 12 hours of checkout. To ensure strict quality control, items ship directly from our central fulfillment hub via expedited international shipping: